总装设备工程师岗位职责
工程师职责2.08W
总装设备工程师是做什么的?本文提供总装设备工程师的岗位职责例子,包括详细的工作内容及任职要求。Key responsibilities: ? The development of conveyor line and single line side tooling /equipment (RFQ, cost analysis, pre-research of equipment automation program, research on equipment selection, supplier selection, etc.)
? E-FMEA /CP
? Hand over equipment to MFG and CM by following standard 8012,39
? Time management and control. Report on business progress status and risk identification regularly
? Leads or executes equipment projects (develops, calculates, plans, TSU, procures and verifies) for plants.
? Creates and analyses the equipment part of the process layouts.
? Performs safety-, reliability- and cost analyses.
? Performs Equipment FMEA. 执行设备FMEA。
? Supports the running production (Industrial Engineering, Production and Maintenance) with second line analysis within the area of responsibility.
? Transfers competence within the area of responsibility to Production and Maintenance.
? Contributes in development of instructions and routines within the area.
? Participates in or leads relevant standard- and technical organisations within the area of responsibility with authority to represent VCC.
? Follows the decided working methods such as VPDS and applicable BMS routines and E-card.
Qualification:机械工程专业本科,工业电器自动化,机械电子工程或以上
Bachelor degree or above in industrial electrical automation, mechanical engineering, mechanical engineering
欧、美系或日系整车工厂5年以上新建项目或改造项目,输送线或单套线边设备的开发经验
Have more than 5 years’ experience on new projects, renovation projects, conveyor line equipment and single line side equipment development in European, U.S. or Japanese automotive factory
● 熟练使用英文,听说读写Good skill in English including listening、speaking、reading and writing.
● 具备本科/硕士科学水平或相似的基本能力Technical basic competence on Bachelor / Master of sciences level or similar
● 团队精神Teamwork spirit
●Strong as a driver to deal with conveyor line package
在项目阶段,积极主动地扮演驱动者,完成输送线或线边设备的开发
● Strong communication ability 很强的沟通能力
● Strong leadship 较强的领导力
● 较强的逻辑能力Strong logic and analysis ability
●较强的设备机械专业知识和经验Knowledge within the equipment mechanical area.
●具备使用CATIA V5 ,AUTO CAD ,office 的经验CATIA V5,AUTO CAD, office experience.
●吃苦耐劳,能承受高压力,可适应加班工作 Can work under high pressure and work overtime.
●积极学习,自我改善 The ability of positive learning and self improvement.
● Good skill to use CATIA V5 /AUTO CAD design , implement ,office ,
● 会识别3坐标测量报告,knowledge and skills in Geomitry --measure pallet
岗位要求:
具有3年以上在整车厂总装设备工作经验,熟悉汽车装配工艺,具有汽车制造设备选型、安装、调试等系列经验;熟练使用office办公软件
岗位职责:
1、负责总装车间输送设备、标准设备、检测设备等的+方案与预算制定;
2、负责总装设备相关标准、规范的分析、制定及修订;
3、负责设备的设计选型和购置,组织招标、技术评定、技术协议签署、设计图纸审核、安装、调试、验收、工艺验证及问题整改;
4、负责总装设备预制和制造现场服务、质量控制和进度监控;
5、负责设备的先进技术对标和引用,及现有设备的改造和改善工作;
6、参与工厂初步规划和布置方案、厂房建设规划及工艺改进;
? E-FMEA /CP
? Hand over equipment to MFG and CM by following standard 8012,39
? Time management and control. Report on business progress status and risk identification regularly
? Leads or executes equipment projects (develops, calculates, plans, TSU, procures and verifies) for plants.
? Creates and analyses the equipment part of the process layouts.
? Performs safety-, reliability- and cost analyses.
? Performs Equipment FMEA. 执行设备FMEA。
? Supports the running production (Industrial Engineering, Production and Maintenance) with second line analysis within the area of responsibility.
? Transfers competence within the area of responsibility to Production and Maintenance.
? Contributes in development of instructions and routines within the area.
? Participates in or leads relevant standard- and technical organisations within the area of responsibility with authority to represent VCC.
? Follows the decided working methods such as VPDS and applicable BMS routines and E-card.
Qualification:机械工程专业本科,工业电器自动化,机械电子工程或以上
Bachelor degree or above in industrial electrical automation, mechanical engineering, mechanical engineering
欧、美系或日系整车工厂5年以上新建项目或改造项目,输送线或单套线边设备的开发经验
Have more than 5 years’ experience on new projects, renovation projects, conveyor line equipment and single line side equipment development in European, U.S. or Japanese automotive factory
● 熟练使用英文,听说读写Good skill in English including listening、speaking、reading and writing.
● 具备本科/硕士科学水平或相似的基本能力Technical basic competence on Bachelor / Master of sciences level or similar
● 团队精神Teamwork spirit
●Strong as a driver to deal with conveyor line package
在项目阶段,积极主动地扮演驱动者,完成输送线或线边设备的开发
● Strong communication ability 很强的沟通能力
● Strong leadship 较强的领导力
● 较强的逻辑能力Strong logic and analysis ability
●较强的设备机械专业知识和经验Knowledge within the equipment mechanical area.
●具备使用CATIA V5 ,AUTO CAD ,office 的经验CATIA V5,AUTO CAD, office experience.
●吃苦耐劳,能承受高压力,可适应加班工作 Can work under high pressure and work overtime.
●积极学习,自我改善 The ability of positive learning and self improvement.
● Good skill to use CATIA V5 /AUTO CAD design , implement ,office ,
● 会识别3坐标测量报告,knowledge and skills in Geomitry --measure pallet
岗位要求:
具有3年以上在整车厂总装设备工作经验,熟悉汽车装配工艺,具有汽车制造设备选型、安装、调试等系列经验;熟练使用office办公软件
岗位职责:
1、负责总装车间输送设备、标准设备、检测设备等的+方案与预算制定;
2、负责总装设备相关标准、规范的分析、制定及修订;
3、负责设备的设计选型和购置,组织招标、技术评定、技术协议签署、设计图纸审核、安装、调试、验收、工艺验证及问题整改;
4、负责总装设备预制和制造现场服务、质量控制和进度监控;
5、负责设备的先进技术对标和引用,及现有设备的改造和改善工作;
6、参与工厂初步规划和布置方案、厂房建设规划及工艺改进;
岗位职责:
1、新车型工装夹具的导入,确保工装的顺利导入和运行;
2、工装夹具的设计和改进。
能力要求:
1、本科及以上学历;
2、熟悉汽车专业知识,熟练使用Word,Excel等办公软件,熟练CATIA/CAD等绘图软件;
3、熟悉总装工装导入流程、运行方式,会运用软件设计工装;
4、有良好的沟通协调能力。
-
硬件技术支持工程师岗位职责
硬件技术支持工程师是做什么的?本文提供硬件技术支持工程师的岗位职责例子,包括详细的工作内容及任职要求。1、负责公司硬件产品和系统软件售后维护工作,包括日常运维、故障处理、定期巡检等;2、能够很好地和客户沟通,了解客户产品的使用情况,提出合理化建议;3、与...
-
土建专业监理工程师岗位职责
土建专业监理工程师是做什么的?本文提供土建专业监理工程师的岗位职责例子,包括详细的工作内容及任职要求。湛江土建专监:1、参与编制监理规划,负责编制监理实施细则;2、审查施工单位提交的涉及本专业的报审文件,并向总监理工程师报告;3、参与审核分包单位资格;4、指...
-
系统开发维护工程师岗位职责
系统开发维护工程师是做什么的?本文提供系统开发维护工程师的岗位职责例子,包括详细的工作内容及任职要求。工作内容:1.日常维护(账号开立,权限设定),异常处理2.报表开发3.需求分析,程序修改4.配合月结职位要求:1.计算器相关专业知识2.懂ERP流程,精通informix数据...
-
调试工程师岗位职责
调试工程师是做什么的?本文提供调试工程师的岗位职责例子,包括详细的工作内容及任职要求。工作职责:1、物联网系统、物联网能源监控系统前期现场勘查;2、工程项目技术资料撰写及支持;3、物联网能耗监控设备在线监测系统的安装和调试,携带便携设备进行现场数据的采...